Skip to the page's content

What do you need?
Formulations

Lather Up Buttercup Body Wash

A deeply moisturising, non-stripping body wash that leaves a soft post-rinse after feel. Formulated with TI-NatSurf® QCB to provide a high stable sulphate-free foam in the presence of oils. Butter-Plus™ E delivers effective barrier properties, combined with great moisturisation and excellent emolliency. Zeniberry® R-XX is a natural anti-oxidant with excellent foam boosting properties!

Request Available Samples (4)
Person lathering a soapy cleansing bar along their arm, covered in white foam, against a teal background.

Formulation

Select products to request samples

Phase A

Deionized water
0.00%
Dimethyl Lauramide/Myristamide
2.00%
Propylene Glycol
2.00%
Zeniberry® R-XX
1.00%
Phenoxyethanol, Ethylhexylglycerin
1.00%
Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
1.00%

Phase B

TI-NatSurf® QCB
TI-NatSurf® QCB TC USA 55.00%
Laureth-4
4.00%
ESSACHEM® AR-5
ESSACHEM® AR-5 TC USA 5.00%
ESSACHEM® O
ESSACHEM® O TC USA 5.00%
Butter-Plus™ E
Butter-Plus™ E TC USA 3.00%

Phase C

Fragrance
0.00%
FD&C Colour
0.00%
Sodium Hydroxide
0.00%
Citric Acid
0.00%

Specifications

Opaque Thick Liquid

Procedure

  1. 1 Aqueous Phase (A):
  2. 2 Into a main vessel add component #1 and begin mixing using a dispersing blade at moderate speed.
  3. 3 While mixing containing by adding ingredients #3 through #5 one at a time ensuring each is fully incorporated before adding the next one.
  4. 4 Next, add ingredient #6 then increase mixing speed to high to fully disperse and incorporate.
  5. 5 Once uniform, reduce mixing speed back to moderate, and begin heating to 80 ± 1 ºC.
  6. 6 Surfactant/Oil Phase (B):
  7. 7 In a separate secondary vessel, add component #7, begin mixing at moderate speed.
  8. 8 While mixing at moderate speed continue by adding ingredients #8 through #11 one at a time, ensuring to minimized air entraining in the process.
  9. 9 While continuing to mix. begin heating to 80 ± 1 ºC.
  10. 10 Completion:
  11. 11 Once both vessels are at target temperature of 80 ± 1 ºC, proceed by adding contents of the secondary vessel, Phase-B to the main vessel containing Phase-A, under continuous mixing at moderate speed and while maintain a temperature of 80 ± 1 ºC.
  12. 12 Continue mixing while increasing speed to high for a period of 5 minutes.
  13. 13 When completely homogeneous discontinue heat, begin cooling while mixing at low speed.
  14. 14 At 40 ºC add #12, and/or #13 as desired, and mix each until is incorporated.
  15. 15 Adjust to final pH using #14 and #15 as required.

Enquiry

0

Your enquiry is empty

Add products to start your enquiry.

Browse products